New
Main features
  • Compatible with the Synapse AS3X+ / SAFE Flight Stabilization Module (SPMAS6000, available separately)
  • Patented PowerSafe™ redundancy system with dual battery input ports with IC3 connectors. Perfect for power-hungry aircraft and high current servo applications drawing up to 35A (50A max burst)
  • Innovative power management system designed with sleep mode allowing pilots to remotely power on/off from the transmitter
  • Fast boot recovery technology allows the gyro system to be rebooted in flight upon any electrostatic discharge or power interruption, providing pilot control within milliseconds using a saved stabilization calibration
  • Regenerative servo support for any number of servos
  • Forward programming for easy adjustments to failsafe settings, servo frame rate settings, AS3X+ settings, and more
  • USB-C port for easy product registration and firmware updates
  • 12V capable for use with 12-volt servo applications (must be activated via Forward Programming)
  • Integrated battery capacity monitor automatically reports the battery capacity used during flight and can reset automatically when fully charged batteries are installed
  • Integrated Black Box telemetry log saves all telemetry data automatically when a Micro SD card is installed (Micro SD card not included)
  • Integrated status LED provides helpful information during start-up, including warnings and mode indicators
  • SRXL2 connectivity for easy, one-wire connection to supported devices
  • Ready to use with Spektrum Smart ESC for one-wire telemetry data without the need for modules, links, and wires
  • Receiver pack energy, voltage sensor, and flight log telemetry data available without the need for additional sensors
  • Temperature, imbalance, cycles, and cell voltage telemetry data available when using Smart batteries
  • When using an SPM4651T remote receiver, there is full-range telemetry with an integrated barometer providing altitude and vario telemetry without additional modules
  • Included Momentary Pushbutton allows booting or shutting down the system. However, shutting down the system requires a specific press-and-hold pattern to prevent accidental shutdowns in case the button fails or disconnects. The switch itself must not be substituted. Additionally, there is a power switch on the receiver itself that can be used instead
  • Rubber grommet hard mounts and minimalistic labeling help produce the cleanest model setups
  • Capable of high-speed 11ms frame rates. It can be boosted to 5.5ms, if the servo supports it, for improved stabilization when using Synapse
  • Binding is easier than ever, with four options to initiate the bind process
  • Integrated telemetry with built-in ports for RPM, flight pack voltage, temperature sensors, and X-bus for telemetry sensor expansion
  • Compatible with all Spektrum DSMX transmitters
  • Not compatible with DSM2 AIRMOD JR Module (SPMMSJR720)
Package Contents
  • (1) AR20410T 20-Channel PowerSafe Receiver
  • (1) SPM4651T SRXL2 Remote Serial Telemetry Receiver
  • (3) SPM9747 SRXL2 DSMX Remote Receivers
  • (1) 6" SRXL2 Remote Receiver Extension
  • (1) 12" SRXL2 Remote Receiver Extension
  • (1) 24" SRXL2 Remote Receiver Extension
  • (1) 36" SRXL2 Remote Receiver Extension
  • (2) Battery IC3 Connectors
  • (2) Charge Receptacles
  • (1) Aircraft Telemetry Volt Sensor
  • (1) Soft Switch
  • (1) Instruction Manual

SPEKTRUM AR20410T 20-Ch PowerSafe Telemetry RX

SPMAR20410T

The Spektrum™ AR20410T PowerSafe™ receiver is a feature-packed 20-channel receiver with full-range telemetry. Spektrum PowerSafe receivers are designed for models using numerous servos and accessories that draw excess current, such as those found on giant-scale airplanes and jet models. They feature a robust power bus designed to manage high-current loads, as well as dual 13AWG battery input leads with IC3™ connectors for use with larger battery packs.
€465,50 Pvp price (with/VAT)
No Stock
Main features
  • Compatible with the Synapse AS3X+ / SAFE Flight Stabilization Module (SPMAS6000, available separately)
  • Patented PowerSafe™ redundancy system with dual battery input ports with IC3 connectors. Perfect for power-hungry aircraft and high current servo applications drawing up to 35A (50A max burst)
  • Innovative power management system designed with sleep mode allowing pilots to remotely power on/off from the transmitter
  • Fast boot recovery technology allows the gyro system to be rebooted in flight upon any electrostatic discharge or power interruption, providing pilot control within milliseconds using a saved stabilization calibration
  • Regenerative servo support for any number of servos
  • Forward programming for easy adjustments to failsafe settings, servo frame rate settings, AS3X+ settings, and more
  • USB-C port for easy product registration and firmware updates
  • 12V capable for use with 12-volt servo applications (must be activated via Forward Programming)
  • Integrated battery capacity monitor automatically reports the battery capacity used during flight and can reset automatically when fully charged batteries are installed
  • Integrated Black Box telemetry log saves all telemetry data automatically when a Micro SD card is installed (Micro SD card not included)
  • Integrated status LED provides helpful information during start-up, including warnings and mode indicators
  • SRXL2 connectivity for easy, one-wire connection to supported devices
  • Ready to use with Spektrum Smart ESC for one-wire telemetry data without the need for modules, links, and wires
  • Receiver pack energy, voltage sensor, and flight log telemetry data available without the need for additional sensors
  • Temperature, imbalance, cycles, and cell voltage telemetry data available when using Smart batteries
  • When using an SPM4651T remote receiver, there is full-range telemetry with an integrated barometer providing altitude and vario telemetry without additional modules
  • Included Momentary Pushbutton allows booting or shutting down the system. However, shutting down the system requires a specific press-and-hold pattern to prevent accidental shutdowns in case the button fails or disconnects. The switch itself must not be substituted. Additionally, there is a power switch on the receiver itself that can be used instead
  • Rubber grommet hard mounts and minimalistic labeling help produce the cleanest model setups
  • Capable of high-speed 11ms frame rates. It can be boosted to 5.5ms, if the servo supports it, for improved stabilization when using Synapse
  • Binding is easier than ever, with four options to initiate the bind process
  • Integrated telemetry with built-in ports for RPM, flight pack voltage, temperature sensors, and X-bus for telemetry sensor expansion
  • Compatible with all Spektrum DSMX transmitters
  • Not compatible with DSM2 AIRMOD JR Module (SPMMSJR720)
Package Contents
  • (1) AR20410T 20-Channel PowerSafe Receiver
  • (1) SPM4651T SRXL2 Remote Serial Telemetry Receiver
  • (3) SPM9747 SRXL2 DSMX Remote Receivers
  • (1) 6" SRXL2 Remote Receiver Extension
  • (1) 12" SRXL2 Remote Receiver Extension
  • (1) 24" SRXL2 Remote Receiver Extension
  • (1) 36" SRXL2 Remote Receiver Extension
  • (2) Battery IC3 Connectors
  • (2) Charge Receptacles
  • (1) Aircraft Telemetry Volt Sensor
  • (1) Soft Switch
  • (1) Instruction Manual

Replacement Parts

Free Deliveries

For purchases equal to or greater 150€

Easy Returns

Exchanges or returns of items

Technical support

For questions and assistance